Beard collection
Very good product it keeps my beard soft, shiny and holds it shape . It smells good and I get plenty of compliments
Scent |
Rated 4 out of 5
|
---|---|
Effectiveness |
Rated 4 out of 5
|
Feel Good Factor |
Rated 5 out of 5
|
SUPPLY:
SCENT PROFILE:
USE:
Apply a dollop to wet beard. Gently massage it in. Rinse well with warm water. Don’t stop until the suds have left your face. For best results, follow with our Restorative Leave-In Beard Conditioner and/or our Hydrate & Nourish Beard Conditioner.
PRO TIP: Only wash your beard with sulfate-free shampoo or wash, since shampoos with sulfates are a follicle menace and leave your beard coarse, dry and frizzy. If your beard is already as coarse and dry as sandpaper, limit your washes to no more than once or twice per week. If you’re a fine or oily-haired gent, wash your beard no more than three times weekly, or else it will look very sad and straggly. Men of all hair types: feel free to condition your beards up to three times per week, in place of shampooing it often.
Water ((Aqua) Eau, Disodium Cocoyl Glutamate, Glycerin, Polyquaternium-7, Disodium Cocoamphodiacetate, Cocamidopropyl Betaine, Sodium Glycolate, Pentylene Glycol, PPG-2 Hydroxyethyl Cocamide, Xanthan Gum, Guar Hydroxypropyltrimonium Chloride, Coconut Fatty Acids, Sodium Diglycolate, Fragrance (Parfum), Tropolone, 1,2-Hexanediol, Caprylyl Glycol, Sodium Benzoate, Panthenol, Sodium PCA, Sodium Phytate, Arctium Lappa Root Extract, Equisotum Arvense Extract, Urtica Dioica (Nettle) Extract, Citric Acid, Leuconostoc/Radish Root Ferment Filtrate, Aloe Barbadensis Leaf Juice
SUPPLY:
SCENT PROFILE:
USE:
Apply generously to damp beard. Gently massage into beard and leave in. For best results, follow with Scotch Porter Conditioning Beard Balm and Smoothing Beard Serum.
PRO TIP: In place of washing your beard everyday with beard wash or shampoo, conditioner wash your beard every other day to keep your beard clean and moisturized. Also, for those with very dry, very coarse beards, apply our leave-in beard conditioner after you’ve applied our rinse out beard conditioner and before our beard balm for an extra dose of moisturization.
Water ((Aqua) Eau), Ricinus Communis (Castor) Seed Oil, Butyrospermum Parkii (Shea) Butter, Behentrimonium Methosulfate, Carthamus Tinctorius (Safflower) Oil, Cocos Nucifera (Coconut) Oil, Cetearyl Alcohol, Cetyl Alcohol, Dipentaerythrityl Hexa C5-9 Acid Esters, Crambe Abyssinica Seed Oil, Simmondsia Chinesis (Jojoba) Seed Oil, Sodium Phytate, Pentylene Glycol, Fragrance (Parfum), 1,2-Hexanediol, Caprylyl Glycol, Tropolone, Aloe Barbadensis Leaf Juice, Panthenol, Salix Alba (Willow) Bark Extract, Sodium PCA, Glycerin, Arctium Lappa Root Extract, Equisotum Arvense Extract, Urtica Dioica (Nettle) Extract, Leuconostoc/Radish Root Ferment Filtrate, Biotin, Phospholipids
SUPPLY:
SCENT PROFILE:
USE:
Work a dollop sized amount into your beard post wash, paying special attention to the ends of your beard. Leave in for 2 - 5 minutes. Maybe check some emails and scroll through our Instagram. Then rinse. Follow with Scotch Porter Conditioning Beard Balm.
PRO TIP: After rinsing the conditioner from your beard, partially dry it. Squeeze excess water from your beard. Use an old cotton t-shirt or microfiber cloth and squeeze firmly and gently (don’t rub!) to remove excess water. Or use lint-free paper towels to get the job done. Just remember to make them lint-free. A face full of white fuzz is not a good look, unless your beard is actually white. NEVER dry your beard with a towel. EVER. The rough surfaces of bath towels snag beard hair and cause unnecessary frizz. Why would you voluntarily do that to yourself?
Water ((Aqua) Eau), Butyrospermum Parkii (Shea) Butter, Ricinus Communis (Castor) Seed Oil, Cetearyl Alcohol, Carthamus Tinctorius (Safflower) Oil, Behentrimonium Methosulfate, Cocos Nucifera (Coconut) Oil, Pentylene Glycol, Fragrance (Parfum), 1,2-Hexanediol, Caprylyl Glycol, Tropolone, Panthenol, Simmondsia Chinesis (Jojoba) Seed Oil, Sodium PCA, Sodium Phytate, Glycerin, Arctium Lappa Root Extract, Equisotum Arvense Extract, Urtica Dioica (Nettle) Extract, Leuconostoc/Radish Root Ferment Filtrate, Aloe Barbadensis Leaf Juice, Biotin, Phospholipids
SUPPLY:
SCENT PROFILE:
Massage a dime (small beards) to quarter sized (big beards) amount of our Scotch Porter Beard Balm into your beard thoroughly.
PRO TIP: Getting the right amount of product on your beard takes some time. Be patient, grasshopper. You can determine the exact amount for your beard’s texture and length as you go along. These are merely starting points.
Water ((Aqua) Eau), Ricinus Communis (Castor) Seed Oil, Cetearyl Alcohol, Butyrospermum Parkii (Shea) Butter, Crambe Abyssinica Seed Oil, Carthamus Tinctorius (Safflower) Oil, Cetyl Alcohol, Sodium Phytate, Behentrimonium Methosulfate, Pentylene Glycol, Fragrance (Parfum), 1,2-Hexanediol, Caprylyl Glycol, Tropolone, Panthenol, Salix Alba (Willow) Bark Extract, Xanthan Gum, Sodium PCA, Glycerin, Arctium Lappa Root Extract, Equisotum Arvense Extract, Urtica Dioica (Nettle) Extract, Leuconostoc/Radish Root Ferment Filtrate, Aloe Barbadensis Leaf Juice, Biotin, Phospholipids
SUPPLY:
SUPPLY:
SCENT PROFILE:
USE:
Smooth one or two (for short beard) to two or three (for longer beard) pumps on damp beard after styling and after combing/brushing. For best results, use after our Hydrate & Nourish Beard Conditioner and/or Restorative Leave-In Beard Conditioner and Conditioning Beard Balm.
PRO TIP: The key to a well moisturized, shiny and frizz-free beard all day every day is to lock in that moisture and smooth the hair cuticle down. While every point in the SP Grooming Process is vital, the serum is the real MVP since it keeps your beard in check throughout the day. Protection is a priority.
Helianthus Annuus (Sunflower) Seed Oil, Canola Oil, Simmondsia Chinesis (Jojoba) Seed Oil, Persea Gratissima (Avocado) Oil, Silica, Zea Mays (Corn) Starch, Fragrance (Parfum), Isohexadecane, Ethylene/Propylene/Styrene Copolymer, Butylene/Ethylene/Styrene Copolymer, Tocopheryl Acetate