Scotch Porter Leave-In Beard Conditioner, the first step to a soft, coarse beard

How to Make Your Beard Soft When It's Coarse or Curly

By the Scotch Porter Team · 8 min read

Man working Scotch Porter Beard Oil into a soft, coarse, curly beard

How to make beard soft: wash it two to three times a week, condition every wash, mist in a leave-in conditioner, seal it with balm, finish with oil, then brush. Coarse, curly beards feel wiry because they lose moisture fast, so the fix is putting moisture in and locking it there, every day.

Yes, we make every product in this routine, so we'll tell you what each one does.

If your beard feels like steel wool by lunch or springs back up the second you brush it down, you're not doing anything wrong. Textured beards need more moisture than straight ones, and they need it every day. Below: why it feels rough, the routine step by step, the mistakes that undo it, and what to use for your beard type.

Why coarse and curly beards feel wiry

A wiry beard is a dry beard. Here's why coarse and curly hair gets there faster than straight hair.

  • The curl blocks your natural oil. Your skin makes its own oil to condition hair, but on a tightly curled strand it struggles to travel from root to tip. The ends dry out first, and dry ends feel rough.
  • Coarse strands are thicker. A thick strand that's dry feels stiff. Give it moisture and the same strand bends, lies flatter and feels smooth.
  • Coils catch on each other. Curly beard hair tangles and frizzes, which makes it look and feel rougher than it is.

How to make your beard soft, step by step

The order matters because each step sets up the next. Here's the routine the way our product directions lay it out.

Scotch Porter Beard Wash, Beard Conditioner, Beard Balm and Beard Oil, the products that make a coarse beard soft
  1. Wash two to three times a week. Use Moisturizing Beard Wash with warm water. Washing every day strips the oil your beard needs, so on off days just rinse with water.
  2. Condition every time you wash. Work Hydrate & Nourish Beard Conditioner through to the ends, leave it for a minute or two, then rinse. Conditioner softens and detangles, which makes every step after it easier. Here's more on what beard conditioner does.
  3. Pat dry to damp. Press a towel against your beard instead of rubbing it, because rubbing roughs up the hair and adds frizz.
  4. Mist in the leave-in. Spray Leave-In Beard & Hair Conditioner Spray through your beard while it's still damp from the towel. That way the balm and oil go on over moisture.
  5. Balm next. Warm a small amount of Beard Balm between your palms and work it from root to tip. It seals moisture in and adds light hold. For more detail, see our guide on how to use beard balm.
  6. Then oil. Rub 2 to 5 drops of Beard Oil between your palms, massage it into the skin first, then pull it through to the ends. It smells like warm spice and powdery musk, so you smell as good as you look.
  7. Brush to finish. A Boar's Beard & Hair Brush spreads product evenly and trains coarse hair to lie down in the direction you brush it. Use a Kent Large Beard Comb first if a longer beard is tangled.

A coarse beard needs moisture every day to stay soft, so on the days you don't wash, rinse and pick up again at step 4.

Spotlight: Leave-In Beard & Hair Conditioner Spray

Scotch Porter Leave-In Beard Conditioner for a soft, coarse, curly beard

This is the step most guys skip, and on a coarse beard it's the one we'd add first. Rinse-out conditioner does its work in the shower and goes down the drain. The leave-in stays in, so your balm and oil go on over a beard that's already conditioned.

Shop Leave-In Conditioner Spray

How to keep a beard soft and tame it all day

Softness that only lasts until lunch doesn't help much. Here's how to keep a beard soft, and how to tame a beard that won't sit right.

How to keep beard hair down

To get your beard to lay flat, brush down and in the direction you want it to lie while the beard is still slightly damp from the leave-in. Balm gives that shape light hold. For stubborn strands at the cheeks or mustache, a small amount of Beard & Mustache Styling Wax holds them in place.

How to tame an unruly beard

Most unruly beards are dry, so start with moisture before you reach for a trim. Detangle with a comb, add balm, then brush. A light trim to even out the shape helps too; our beard care guide covers it.

How to tame a new beard

The first few weeks are the scratchy stage. Start with 2 drops of oil a day and brush daily to train the hair to lie down. Add balm once it's long enough to hold.

How to moisturize the skin under your beard

A soft beard starts at the skin. If the skin underneath is dry, you'll feel itch and see flakes no matter how good the hair looks.

  • Get to the skin. Massage oil in with your fingertips before you pull it through. On a dense beard, part it in a few places so the oil actually reaches the skin.
  • Exfoliate once a week. Exfoliating Beard & Face Wash clears buildup so moisture can get through.

Bumps after a fresh line-up are a separate problem. Tightly curled hairs can curve back into the skin, and razor bumps are common in Black men.1 That's what our fragrance-free Anti-Bump & Ingrown Roller is made for. If dryness, flaking or bumps stick around, hurt or leave dark marks, see a board-certified dermatologist.

Beard softening mistakes that keep it wiry

Most “nothing works on my beard” stories come down to a few habits.

  • Washing every day. Even a gentle wash strips oil if you use it daily, so keep it to two to three times a week.
  • Skipping conditioner. Washing without conditioning leaves out the step that does the softening, and coarse hair needs both.
  • Oil before balm. Our product directions put balm on first and oil on top, and the products are built to work in that order.
  • Oiling only the surface. If the oil never reaches the skin, the skin underneath stays dry and the beard keeps feeling rough, so work it in from the skin out.
  • Too much product. Past 5 drops of oil, a beard just gets greasy and collects lint, so start small and add a drop if the ends still feel rough.
  • Brushing it dry and bare. Brushing a dry beard with no product causes breakage and frizz. Brush after balm and oil.

The best beard softener for coarse hair, by beard type

There's no single beard softener for coarse hair, so think of it as a lineup and match it to your beard.

Your beard Use Why
New or stubble Beard Oil (2 drops), brush Softens the scratchy stage and keeps the skin underneath comfortable
Short and coarse Beard Wash, Beard Conditioner, Beard Oil Cleanse without stripping, soften in the shower, moisturize daily
Medium, curly or coily Wash, Conditioner, Leave-In Spray, Beard Balm, Beard Oil Every step: layered moisture, sealed with balm, finished with oil
Long, frizzy or unruly Leave-In Spray, Beard Balm, Beard Oil, Kent comb + brush Detangles, adds light hold and keeps the ends from drying out
Dry, itchy skin underneath Beard Wash, Beard Oil worked into the skin, weekly Exfoliating Wash Clears buildup and gets moisture down to the skin

For the best beard balm for coarse hair and the best beard conditioner for coarse hair, start with the products above. Want everything at once? The Beard Wash + Beard Conditioner Bundle covers the shower steps, and the full beard collection has the rest. Choosing an oil? Read our guide to the best beard oil for Black men.

What to do at night for a softer beard by morning

These four steps take a couple of minutes before bed.

  1. Rinse or refresh. Rinse off the day's product, or mist in a little Leave-In Spray if your beard feels dry.
  2. Balm, then a few drops of oil. A light layer seals moisture in overnight.
  3. Brush it smooth. Brush in the direction it grows so you don't wake up to a tangle.
  4. Sleep on satin or silk. A smooth pillowcase causes less friction than cotton on curly hair.
Scotch Porter Beard Oil, used before bed to keep a beard soft

Loved by thousands of beards

Beard Oil has 4.9 stars from 955 verified reviews, and Beard Balm has 4.9 stars from 2,395. Here's what the tribe says about softness:

“It makes your beard feel smooth and very soft…” (Stephen G., verified buyer)

“This is the best beard oil I've ever used. It makes my beard much more manageable and smells great doing it.” (Kay N., verified buyer)

Read all Beard Oil reviews or see Beard Balm reviews.

FAQ

How can I soften my coarse beard?

Wash it two to three times a week with a moisturizing beard wash, condition every time, then mist in a leave-in conditioner while it's damp. Seal it with beard balm, add a few drops of beard oil on top and brush. Keep it up every day, because a coarse beard needs moisture daily to stay soft and it dries out faster than straight hair.

Why is my beard so hard and wiry?

Usually because it's dry. Your skin's natural oil has a hard time traveling down a coarse or curly strand, so the ends dry out and feel stiff. Daily washing, hot water and weather make it worse. Regular conditioning, balm and oil put that moisture back, as long as you keep at it every day.

What is the most effective beard softener?

For coarse hair, it's a combination: conditioner and leave-in to soften, balm to seal moisture in, and oil to finish. If you only add one thing, make it a daily beard oil worked into the skin.

How do I keep my beard soft all day?

Apply balm and oil after you wash or rinse in the morning, so they go on a clean beard. Brush it into place, and keep your hands off it during the day. If it dries out by evening, a few extra drops of oil or a light mist of leave-in conditioner will refresh it.

Does coconut oil soften beard hair?

Coconut oil can make hair feel softer, but it's heavy and can feel greasy on a dense beard. A beard oil made for the job, with light jojoba and richer avocado oil, goes on lighter and is made to be worked into the skin underneath. Whichever you use, put balm on first and oil on top.

What is the 3 month beard rule?

It's a common tip: let your beard grow for about three months before judging how it looks or doing a major shape change. That's long enough to get past the scratchy stage. Keep it soft along the way with daily oil and brushing, so you don't quit early.

Where to start

The order is wash, condition, leave-in, balm, oil, brush. Start with the step you're missing; for most coarse beards, that's the leave-in. Buying for someone with a coarse beard? Beard Basics pairs Beard Balm, Beard Oil, Leave-In Conditioner Spray and a Kent Large Beard Comb.

Shop Leave-In Conditioner Spray

Keep reading

Sources

  1. Journal of Drugs in Dermatology, 2019 review on pseudofolliculitis barbae (cites a study putting the rate among Black men at 45% to 83%): https://jddonline.com/articles/dermatology/S1545961619P0246X
Back to blog